INFORMATION ON NEW
THE FIRST PRODUCT TO ANSWER THE PROBLEMS INCURRED WITH TACTICAL FIREARMS
cleans the bore, bolt carrier ,bolt, gas tube etc.
Sharp Shoot R Precision Productsฎ announces a great new product that is the first product dedicated solely for the problems faced by the tactical shooter. Wipe-Out "TACTICAL ADVANTAGE" " which is to be used as a conventional non-aerosol for special use with firearms that are used in tactical applications. "TACTICAL ADVANTAGE" is an answer to specific problems, where the shooter has need for a very carbon aggressive bore cleaner that will also remove copper fouling as well as powder fouling with a minimum of effort. "TACTICAL ADVANTAGE" like other "Wipe-Out products is 100% brushless. "TACTICAL ADVANTAGE" has a dual use for cleaning tactical firearms.
1. "TACTICAL ADVANTAGE" is a brushless bore cleaner.
2. "TACTICAL ADVANTAGE" When mixed with water on a 50/50 ratio and sprayed on bolt carriers and bolts will dissolve carbon on contact.
This exciting new product is easier to use and is considerably less messy, and is totally odorless. It has no complicated method of application. You simply put it on a patch or a mop and swab it thru the barrel, or spray it on a part you wish to clean.. No Muss No Fuss !
"TACTICAL ADVANTAGE" has been designed to be a maximum strength product. In our testing we found that " "TACTICAL ADVANTAGE" was capable of dissolving more fouling faster than any product currently on the market.
Methods of use: specifically for M-16's, AR-15's M4's MP5's HK91's HK 93's etc.
#1. A conventional bore cleaner that is applied to a patch, a nylon brush, or mop and allowed to soak while it dissolves the fouling left in the barrel. We prefer a nylon brush which will hold more chemical. Simply load the brush, push it in once and pull it out.
#2 A Pre- Soak Patch used before using WIPE-OUT "ACCELERATOR" and "TACTICAL ADVANTAGE" will loosen powder fouling and speed the dissolving of copper and carbon. You This method will maximize the removal of fouling in the shortest possible time.
#3 Use "TACTICAL ADVANTAGE" as a barrel swab in between relays or between shot strings to remove powder fouling and begin the job of dissolving carbon and copper. This method is a quick solution that will ensure the cleaning job you do when you have more time will be positive and complete. Many shooters need a product that will clean in the shortest time possible because they have severe time constraints. The body of competitive shooters falls in to this group because they all have minimal amounts of time to clean their firearms between relays. Additionally during break-in of a barrel it is normal to clean the barrel every few shots for at least the first 100 to 150 rounds. Or you may be a high volume shooter , who shoots a large number of rounds before being forced to clean due to the degradation of accuracy. In these particular situations a faster method of cleaning is necessary.
#4 Mix "TACTICAL ADVANTAGE" in a 50/50 ratio and place in a spray bottle. Spray dirty parts fouled with powder residue and carbon. "TACTICAL ADVANTAGE" will remove this fouling on contact. (Use this same method for muzzle brakes and suppressors)
With the breach open apply into the barrel by means of a patch or nylon brush which has been wetted with
the solution. Place the firearm down horizontally on the bench. Wait for 15 to 20 minutes. Put a clean cotton patch on a good jag and push through the bore. The use of a bore brush to scrub is not necessary, ever. Simple and easy with no complication.
While this product has been designed to be totally brushless, admittedly there are those who still wish to use a brush. If the user will take two strokes through the bore with a nylon brush"TACTICAL ADVANTAGE" will produce a luxurious thick lather. Allow it to set as per original instructions for faster results.
"TACTICAL ADVANTAGE" is meant to be used by itself as a cleaner, or in combination with ACCELERATOR .
"TACTICAL ADVANTAGE" is as safe to use as WIPE-OUT and in no manner compromises the safe use of either product.
"TACTICAL ADVANTAGE" it self is a revolutionary new product that is the only product of its type specifically designed for the problems of cleaning encountered by the tactical shooter.
Removal of metal fouling and carbon from the bore can rejuvenate and restore accuracy to and badly fouled firearm. Heavy amounts of brushing to the bore of a firearm can produce damage and un-necessary wear. New "TACTICAL ADVANTAGE" and WIPE-OUT ACCELERATOR were formulated to utilize technology in the safe removal of all types of fouling from the barrel faster, and more efficiently.......and without brushing.
The criteria for this new product "TACTICAL ADVANTAGE" were a tough group to satisfy individually let alone collectively. Sharp Shoot r Precision Inc. developed this product with the aid and consultation of competitive shooters, gunsmiths, barrel makers, and manufacturers within the firearms industry, who specifically have tactical firearms as their primary focus. The resulting research and development team produced a revolutionary new type catalyst to enhance the great properties of "TACTICAL ADVANTAGE" -WIPE-OUT Brushless Bore Cleanerฉ:
TACTICAL ADVANTAGE" will dissolve copper , bronze, cupro-nickel, brass fouling in the bore twice as fast and in half the time without brushing.
"TACTICAL ADVANTAGE" will protect all metal parts including the bore against corrosion & rust.
"TACTICAL ADVANTAGE" is totally safe for all steels (both stainless and carbon)and all metal plating( including chrome lined barrels).
"TACTICAL ADVANTAGE" is harmless to modern gunstock finishes on wood , carbon fiber, or fiberglas. (it is not for use on shellac, varnish or oil)
"TACTICAL ADVANTAGE" dissolves carbon without brushing
"TACTICAL ADVANTAGE" dissolves smokeless powder fouling, and primer fouling, both corrosive and non-corrosive..
"TACTICAL ADVANTAGE" has color indicators show the presence of metal fouling, powder fouling and carbon. (Metal fouling is navy blue, Powder fouling is grey or black, Carbon is tan or brown.)
VIII. "TACTICAL ADVANTAGE" is odorless, relatively safe and easy to use.
X. "TACTICAL ADVANTAGE" cannot gum or leave behind solids that render the firearm useless.
XI. "TACTICAL ADVANTAGE" contains NO ACID and NO AMMONIA.
"TACTICAL ADVANTAGE" is available in a 8 ounce plastic bottle with a flip top lid. This bottle is capable of cleaning
the amount of firearms that can be cleaned with 2 cans of WIPE-OUT.) The suggested retail is $15.99 per bottle, and is manufactured and sold by ,
66071. Pho:785-883-4444 or by Fax at 785-883-2525, e-mail:firstname.lastname@example.org.
Sharp Shoot-R Precision Products
TACTICAL ADVANTAGE INSTRUCTIONS
"TACTICAL ADVANTAGE" is a Revolutionary New Product.....
made specifically for use in "tactical" firearms...
M-16's, AR-15's M4's MP5's HK91's HK 93's etc..
Tactical firearms have very special cleaning problems. They have the normal array of normal fouling in the barrel. Among these are: copper fouling , powder fouling and carbon fouling. Secondarily there is a huge amount of carbon and powder fouling deposited over the working parts of the firearm.....for example , bolt and bolt carrier groups, trigger and trigger groups, gas tubes and finally supressors. It is these special needs that we address with this great new special purpose product = "TACTICAL ADVANTAGE"
PUT "TACTICAL ADVANTAGE" IN A GUN YOU THINK IS CLEAN.........! ! ! ! ! a revolutionary product that solves all problems encountered with conventional bore cleaners. It is a revolutionary product because it is totally BRUSHLESS. Loss of accuracy is normal in all firearms after they have been used in a prolonged shooting session. The barrel will become fouled with gunpowder residue as a result of combustion, additionally: two other materials are deposited internally to the barrel,....... carbon and metal fouling from bullet material . These two are the most difficult to remove and are the greatest cause for the loss of accuracy in a firearm.
To clean the barrel the standard practice has been to dunk a brush into the cleaner and stroke the cleaning rod the length of the bore. (Be sure when you clean to use a good coated cleaning rod and a bore guide, that way there is no damage to the bore, crown, and the throat). A good deal of the evidence of fouling removal comes from the bristles in the brush itself, (copper or bronze.)
A more recent approach has been to product products with heavy amounts of acid and ammonia. While acid and ammonia will remove metal fouling and carbon, they are dangerous to you and your firearm. Products containing large amounts of acids and ammonia still require large amounts of brushing.....but not "TACTICAL ADVANTAGE".
The competitive products contain chemicals which have a horrible smell, and very dangerous to the steel used in gun barrels. There are many sad shooters who have pitted a barrel using cleaners of this type. It is quite easy using these products to permanently damage the interior of the barrel with pitting.
But not with "TACTICAL ADVANTAGE" !
This great new product is also designed to remove carbon fouling from bolts ,bolt carriers, triggers and trigger groups,gas tubes, flash hiders, silencers, muzzle brakes and supressors........on contact.
You simply mix it 50/50 with water, put it in a spray bottle and spray it on the parts to be cleaned of carbon and powder fouling.
Being a totally brushless product with "TACTICAL ADVANTAGE" each cleaning session takes no more than 2 or 3 patches. BOTTOM LINE IS THAT "TACTICAL ADVANTAGE" WILL KEEP A GREAT BARREL IN PREMIUM CONDITION LONGER THAN ANY OTHER CLEANING METHOD. BRUSHING A BARREL IS "DARK AGES "TECHNOLOGY.
INSTRUCTIONS FOR USE OF--------"TACTICAL ADVANTAGE"THE FIRST FIREARM YOU CLEAN WITH "TACTICAL ADVANTAGE" SHOULD BE ONE YOU THINK IS CLEAN. .
Simply apply the "TACTICAL ADVANTAGE"with a mop or a loose patch or a nylon brush. Dont use a jag and a tight patch, because that method squeegees out all the chemical. I use a nylon brush because it holds the most chemical. An added benefit is the brush will make "TACTICAL ADVANTAGE" suds. If you use a patch make sure that the patch is really juicy. "TACTICAL ADVANTAGE" designed to work with out brushing. Allow to set for 20 minutes. Push a clean patch thru the bore. Now apply a second application, and allow it to set for 10 minutes.
If you get no color on the second patch, you have proof that the barrel came clean in the first 20 minute session. Because of its anti corrosive ingredients it is not necessary to put oil in the bore. The oil will increase carbon deposits. This will also remove the necessity of taking fouling shots. Your cold barrel- first shot will be where the group is.
"TACTICAL ADVANTAGE" tells you when your firearm is fouled with powder residue, carbon, and metal fouling by the color left on a patch. What you must do is get to a clean barrel, where you have no color showing on a patch. Simply apply "TACTICAL ADVANTAGE" to the breech( with the use of a bore guide)until the barrel is well coated. Barrels heavily fouled with copper may be cleaned quicker with the addition of "ACCELERATOR "
Set the firearm on the bench horizontally. Let it sit for 10 minutes. After 10 minutes has elapsed, push a clean cotton patch on a jag through the bore . Heavily fouled guns or those cleaned with other products should be left overnight on the first cleaning. Patch out in the morning. Re-apply "TACTICAL ADVANTAGE" and wait 10 minutes. Patch out and check for any color. If color is present.......re-apply and let set overnight. Repeat the morning procedure. Once the gun is really clean, .......a normal shooting session (20 to 60 rounds) can be cleaned in less than one hour. You have to get the barrel clean to start with.......The reason we ask you to start with a gun you think is clean .............is so that you will understand what ineffective cleaners have been leaving in your barrel.
Also there may be a distinct layering effect of fouling which is caused by ineffective cleaning. The barrel may actually have as many as 7 or 8 layers of fouling which is probably the most difficult to remove. The barrel with this type of fouling may take 2 or 3 overnight applications of "TACTICAL ADVANTAGEs2" to finally get to a clean patch with no color.
Powder fouling (both smokeless powder and black powder) will be grayish black on the patch .Copper fouling will be deep navy blue. Carbon will be tannish to brown in color . Please be aware that large amounts of fouling on a very dirty firearm can build up in layers.
IF THERE IS NO COLOR ON THE PATCH..........THE FIREARM IS CLEAN.
IF THERE ISANY COLOR ON THE PATCH: Apply the "TACTICAL ADVANTAGE" again to the barrel.
If the first patch showed all three colors, the gun is heavily fouled. Let the gun set for 60 minutes or more . Push a clean patch through the bore. If there is still color on the patch re-apply and set for a longer period of time. Whenever possible the easiest method using PATCH-OUT is to LET IT SET OVERNIGHT.
REMEMBER THE FOLLOWING:A PATCH WITH NO EVIDENCE OF COLOR IS EVIDENCE OF A CLEAN FIREARM . Deep navy blue on a patch is evidence of heavy copper fouling .In cases where the firearm has not been properly cleaned, or shot quite a number of times "TACTICAL ADVANTAGE" may be applied and the gun left to set overnight, with no harm to the firearm. Patch out the bore in the morning , Re-apply "TACTICAL ADVANTAGE" liquid, and let firearm set 60 minutes. There should be NO EVIDENCE OF COLOR ON A PATCH. Always let the firearm rest horizontally......never muzzle-up when using "TACTICAL ADVANTAGE" .
"TACTICAL ADVANTAGE"RESTORES BARREL LIFE AND ACCURACY TO THESE GUNS. ItS odorless and non-flammable, It contains a rust inhibitor, and will not stain hands of clothing .
"TACTICAL ADVANTAGE"is not safe for varnish , shellac or old oil type wood finishes. It will remove them. However "TACTICAL ADVANTAGE" is safe for all the modern finishes ( poly-urethanes, and epoxys.)and all types of synthetic stocks It will dissolve brass, bronze, and copper. Most aluminums (AR-15/M-16 receivers and all aluminum pistol frames) are safe with "TACTICAL ADVANTAGE" , but some will discolor to a dull grey. IF you have any doubt try a test area where it will not be visible. "TACTICAL ADVANTAGE" will NOT DISSOLVE LEAD but it will degrade lead so that it can be pushed out with a patch."TACTICAL ADVANTAGE" contains no acid and no ammonia."TACTICAL ADVANTAGE" CANNOT CAUSE RUST.It will not gum, or form solids in either the action or the barrel ."TACTICAL ADVANTAGE" is safe for all barrel steels,including chrome lined bores and both stainless and carbon steel. Note: "TACTICAL ADVANTAGE" will remove Molybdenum.
"TACTICAL ADVANTAGE" is recommended for rifles, pistols, revolvers, shotguns, and will also clean supressors, flash-hiders , muzzle brakes, and silencers .The suggested retail price is $15.99 per 8 ounce bottle .It's made in the United States and meets all governmental criteria .
Sharp Shoot R Precision Inc.Box 171 -Paola , KS 66071
785-883-4444 Pho . -785-883-2525 Fax
web site: web site =www.sharpshootr.com email: getinfo @ sharpshootr.com
Copyright ฉ 1999-2011 ./SharpShoot R Precision. All rights reserved.