“NO-LEAD” Brushless Lead Remover ™

NO-LEAD which will safely clean firearms, without brushing, of lead deposits and lead scale wherever it is deposited on the firearm.

We are determined to make the best cleaning equipment possible and to address all problems that are encountered in the shooting sports.

There are thousands of shooters who use nothing other than lead or lead alloy bullets. Whether you are a Cowboy Action Shooter, a Combat Shooter, a Black Powder Shooter, or you Reload and Cast your own bullets – you will love “NO-LEAD” ™ Brushless Lead Remover .

It has been an established fact that lead scale and deposits will destroy firearm accuracy. Deposits of lead can be the most difficult to remove of all types of fouling. Endless brushing to remove lead deposits has a counterproductive effect on barrel life. With this in mind we developed a product “NO-LEAD” ™ Brushless Lead Remover , which is superior to any lead removing product on the market.

NO-LEAD’ ™ Brushless Lead Remover ™ has these great features:

1.”NO-LEAD” ™ Brushless Lead Remover ™ is a clear WATER THIN PRODUCT that will dissolve lead and lead alloys without brushing.

2.”NO-LEAD” ™ Brushless Lead Remover ™ is safe to use both for the firearm and the shooter. It will not cause corrosion.

3.”NO-LEAD” ™ Brushless Lead Remover ™ has a unique action that causes it to turn to a CHALKY GRAY as it dissolves lead. When the color does not change from the clear red color: that means all the lead has been dissolved.

4. “NO-LEAD” ™ Brushless Lead Remover ™ is easy to apply: simply coat the area which has lead fouling, with a patch or a mop and allow it to set for 20 minutes. Then patch out the dissolved lead deposits. Then apply one application of WIPE-OUT ™ Brushless Bore Cleaner to remove any traces of carbon and powder fouling.

5.”NO-LEAD” ™ Brushless Lead Remover ™ is packaged conveniently in an 8 ounce squeeze bottle that has a  top to keep the bottle contents from leaking.

NO-LEAD ™ Product Information and Instruction

This product was developed over five years of testing in the developmental stage. The criteria for this new product were set by a tough group to satisfy individually let alone collectively. Sharp Shoot R Precision developed this product with the aid and consultation of competitive shooters, gunsmiths, barrel makers, and manufacturers within the firearms industry, the same bunch that were involved in the development of WIPE-OUT™ Brushless Bore Cleaner©:

 

TECHNICAL BULLETIN:

Click here for downloadable version

HOW to use NO-LEAD ™ Brushless Lead Remover

It has been an established fact that lead scale and deposits will destroy firearm accuracy. Deposits of lead can be the most difficult to remove of all types of fouling. Endless brushing to remove lead deposits has a counterproductive effect on barrel life. With this in mind we developed a product “NO-LEAD” ™ Brushless Lead Remover , which is superior to any lead removing product on the market.

The intended use for No-Lead is to dissolve lead scale and let fouling in the barrel, top strap, and a face of the cylinder. Remember that No-Lead is not a cleaner. It is a product that is intended only to dissolve lead. When using no lead you must remember that in dissolving lead, all forms of protection for the firearm are dissolved. It is necessary to use either Patch-Out or Wipe-Out in between the applications of No-Lead.

Special care needs to be taken when cleaning rimfire firearms. Rimfire barrels have very shallow rifling and they have a much softer rock-well than in centerfire barrels. Therefore we do not recommend brushing any rimfire barrel unless absolutely necessary. In most cases the lead fouling in rimfire barrel is usually at the mouth of the chamber. The lubricants on modern rimfire ammunition are excellent and in most cases never cause accuracy problems. This is why we don’t recommend brushing any rimfire barrels unless absolutely necessary. Cheap rimfire ammunition can produce lead fouling, and for that reason we recommend only using the best ammunition available in rimfire firearms.

The directions for use of are No-Lead as follows: apply No-Lead to the area which has led fouling. Allow the no lead to set for 20 min. After 20 min. wet a patch with either Wipe-Out or Patch-Out, and push through the barrel. The Wipe-Out, and or Patch-Out, will remove the dissolved lead residue and protect the barrel from corrosion. You then inspect the firearm to see if there is still led fouling present. If led fouling is still present, apply a second application of No-Lead, and allow it to set for 20 min. Follow this up with another application of either Wipe-Out or Patch-Out.

The lead that is dissolved will have a white, or gray color. And be somewhat thick to the touch. It will be easily removed with a good caliber specific jagged and a tight cotton patch.

The active ingredients in no lead are totally used up within 20 min. For that reason, we apply no lead in 20 min.cycles. Each of these cycles must be followed within application of Patch-Out or Wipe-Out. The Patch-Out and Wipe-Out insurers the protection from corrosion.

Please be sure to remove any No-Lead that comes in contact with blued surfaces, with an application of Wipe-Out or Patch-Out. Either of these products contain several powerful anti-corrosive.

NO-LEAD” ™ Brushless Lead Remover ™ is easy to apply: simply coat the area which has lead fouling, with a patch or a mop and allow it to set for 20 minutes. Then patch out the dissolved lead deposits. Then apply one application of WIPE-OUT ™ or PATCH-OUT ™ Brushless Bore Cleaner to remove any traces of lead residue ,carbon and powder fouling.

NO-LEAD” ™ Brushless Lead Remover ™ is available in an 8 ounce plastic bottle with  top cap

This product is made and sold by , Sharp Shoot R Precision Products®.

Available to all distributors, and dealers in this market area.

Refer to price list for pricing

Please check out our price list and catalog!

 

TESTIMONIAL
Sender’s name: Michael B

Message: My father and I love shooting, mostly 44mags which I reload for, however, my father has an old Colt Detective .38 special he bought when I was first born. He finally pulled it out and seen it was so leaded out it wasnt funny. I contacted a tech at Graf & Sons who told me about your product No Lead, and to follow up after with your Wipeout. He also recommended your Accelerator just before using Wipeout to speed things up but wasnt necessary, but I still bought it along with the No Lead and Wipeout. When my package came, I’ll admit I was a bit skeptical, being there was no strong smells to any of the chemicals, but still used figuring it wouldnt hurt to try still… After applying the No Lead and letting it set for about an hour, I went back to the garage to check it out. Pushing a patch through I couldnt believe my eyes seeing all this reddish/pink looking stuff come out, and the barrel was virually unleaded. Only a tiny bit remaind because, hate to say it, but while my father is an excellent shot at the range, he isnt big on cleaning, just running a patch through and being done with it. So this is about 46 years of lead build up…

I applied one more application of No Lead and this cleared it up. I next applied as directed one coated patch of Accelerator then foamed inside the barrel with Wipeout and let it sit.

My fathers barrel is practically like NEW again.

Thanks from Kentucky, and also to Graf & Sons who were the ones who highly recommended your products over others, which we talked about over the phone as well. The tech was right when he said Sharp-Shoot-R wins hands down.

I cant remember the Techs name though. But made this purchase about a week ago but just got around using this evening/morning.

Again, thanks a million for your products!

Sincerely,
New Sharp-Shoot-R fan from Kentucky,
Michael B.